The wall, not the roof

Fiber Cement Siding in Chattanooga

What keeps fiber-cement siding dry?

Clearance, flashing, the correct fasteners, primed cut edges, and gaps for expansion. Fiber-cement can look like wood clapboard. It does not warp or melt the way vinyl can, and it is not installed the same way.

  1. 01Clearance

    Boards stay off the ground and off rooflines. Buried edges are a way moisture gets in.

  2. 02Flashing

    Flashing goes behind every joint.

  3. 03Fasteners

    The fastener type and placement follow fiber-cement, not vinyl.

  4. 04Primed cuts

    Every cut edge is primed so the bare material does not take on water.

  5. 05Gaps

    Gaps between boards leave room for expansion.

If the project also includes a new roof on a build or an addition, that roof is roof installation. This page is the siding.

Dynamic Roofing & Exteriors installs fiber-cement siding in Chattanooga and surrounding communities. Service areas.

Common questions

Questions homeowners ask about fiber-cement siding

Can fiber-cement siding sit on the ground or tight against the roof?

No. It needs clearance from the grade and from rooflines. Boards buried against soil, or tight to a roof edge, are a way moisture gets into the material. We keep those clearances when we install.

Why do the cut edges of fiber-cement have to be primed?

A cut leaves bare material. We prime those edges so they do not take on water. Flashing behind the joints and the correct fasteners do the same job at the seams and at the wall, and gaps between boards leave room for expansion.

Is fiber-cement installed the same way as vinyl siding?

No. Fiber-cement can look like wood clapboard, and it does not warp or melt the way vinyl can. It holds paint. The fasteners, flashing, clearances, and primed cuts are specific to fiber-cement, so the installation is its own job.

Request a Siding Estimate

Tell us which walls you want covered, or what the existing siding is doing.

No obligation, no pressure. To reach us now, call (423) 280-7952.